Neon lighting is comparable to incandescent lighting when it comes to power consumption and luminescent output whilst LED lighting is more power saving than fluorescent lighting, requiring sometimes only one-tenth the wattage for a similar light output to an equivalent neon sign.
As much as 30 percent of the United States energy budget is consumed by lighting, most of which can be still being consumed by older, less efficient lighting. The use of newer technologies, such as for instance LED lighting, can make brighter light sources with much less usage of energy. Along with superior efficiency, both of these new forms of bulbs have considerably longer life spans than neon equivalents, reducing waste and the requirement for landfill space when they're no more in service. Led Sign modules
Furthermore, the "expected life" of LED lighting isn't measured traditionally to the stage of failure but to the stage where in fact the light emitted reaches 70% of the original lumens. So according, living of LEDS could and should exceed the estimate 50,000hrs by a substantial amount. Typical fluorescent lamps convert about 22% of the ability input to visible white light, on the other hand LED lighting converts 50% or more of the ability input into visible white light.Timber laser cutting
For many years the landmark sign at Gillette's world shaving headquarters (the top of proctor and gamble's south Boston manufacturing plant) has been running every day using 5000ft of neon tubing. Early 2010 Proctor and Gamble made a decision to convert the 16ft x 400ft sign to utilize LED modules. This could drastically enhance the efficiency of the sign, cutting the annual running cost for $32,000 to only $5,000. This together with a grant of $56,000 from the Massachusetts gas & electricity utility ensures Proctor and Gamble the full payback in under 3 years. Know more
If every standard shop front light box in the US and UK was converted to utilize led modules it might have an enormous positive effect on the environment. A Light box sign fitted with fluorescent tubes will have to be changed 6 times to match living of LED modules, and would use 5 times more power. It is actually just a matter of time before most of us convert to LED.